6.4.2.1 Installation / Settings / TV Settings
The
TV Settings
screen contains two options:
TV
Screen Format
and
Display Format
.
The
TV Screen Format
allows you to adapt your
receiver output to the aspect ratio of your TV set (4:3 or
16:9).
You can also modify the Display Format value to adapt
the way the video is transformed in case the broadcast
aspect ratio is different from your TV aspect ratio.
TV Settings Screen
In such a case:
6.4.2.2 Installation / Settings / System Settings
The
System Settings
screen contains some of the
configuration parameters you may change.
Video Standard
This option is preconfigured depending on the
Country
selection. There are two possible standards: PAL and
SECAM.
TV SCART Output, VCR SCART Output
Select the appropriate format of the output signals.
Note: to get the best picture quality and sharpness set the "TV
SCART output" option to "RGB".
System Settings Screen
Dolby Digital
Default
Dolby Digital
setting is
No
. Do not modify this
setting if your audio receiver supports PCM only (Stereo
digital). If your audio receiver supports AC3 (multisound
system Dolby Digital 5.1), set
Dolby Digital
to
Yes
.
You will find detailed info concerning: the
Easy
Recording
,
Recording Type
and
Device
settings in the
Advanced Settings section later in this manual
(see chapter 7).
Default Volume level
This option is used to set the sound level at wake-up
from standby. It is recommended to set it close to the
maximum value.
English
C H A N G E T H E S E T T I N G O F YO U R R E C E I V E R
29
Aspect
TV screen format = 4:3
TV screen format = 16:9
Display
ratio
format
broadcast format = 16:9
broadcast format = 4:3
Letter-box
full picture with black bars
at the
full picture with black bars
on the left
top and bottom
and right
Pan-Scan
picture cut-off
on the left and right
picture cut-off
at the top and bottom
Full screen
full picture
squeezed to fit
full picture
squeezed to fit
6610_A5_GB.qxd 01/09/2004 12:58 Page 29
