Philips AVENT AVENT SCD525, User Manual

Page: 11 / 254

10
6.4 Nightlight
D
Note:
You can also switch the nightlight on and off in
the menu of the parent unit (see chapter ‘Menu
options’, section ‘Nightlight’).
1
Press the nightlight button Q on the baby unit
to switch on the nightlight. (Fig. 24)
•
Q
appears on the display of the parent unit.
2
Press the nightlight button Q again to switch
off the nightlight.
• The nightlight dims gradually before it goes
out completely.
•
Q
disappears from the display of the parent
unit.
E
Tip:
Switch off the nightlight when you operate the
baby unit on the non-rechargeable batteries. This
saves power.
6.5 Paging the parent unit
If you have misplaced the parent unit and its
volume is switched off, you can use the PAGE
button on the baby unit to locate the parent unit.
D
Note:
The paging function only works when the parent
unit is switched on.
1
Press the PAGE button on the baby
unit (Fig. 25).
• The message ‘Paging’ appears on the display
of the parent unit.
• The parent unit produces a paging alert
tone.
2
To stop the paging alert tone, press the PAGE
button again or press any button on the
parent unit.
2
Press the or – button on the parent
unit until the desired loudspeaker volume for
the parent unit has been reached (Fig. 21).
•
The display gives visual feedback on the
volume settings of the parent unit: (Fig. 22)
•
Volume switched off/silent baby
monitoring
•
Minimum volume
•
Maximum volume
D
Note:
If the volume is set to a high level, the units
consume more power.
6.2 Talk function
You can use the TALK button on the parent unit
to talk to your baby (e.g. to comfort your baby).
1
Press and hold the TALK button and talk
clearly into the microphone from a distance of
15-30cm (Fig. 23).
• The green LINK light starts lashing and the
message ‘Talk’ appears on the display.
2
Release the TALK button when you have
inished talking.
6.3 Sound level lights
The parent unit continuously monitors the sound
level in your baby´s room and the sound level
lights let you know if there is any activity. If your
baby cries, you see the sound level lights light up
on the parent unit.
•
As long as the baby unit does not detect a
sound, all sound level lights on the parent unit
are out.
•
When the baby unit picks up a sound, one or
more sound level lights on the parent unit go
on. The number of lights that go on is related
to the loudness of the sound picked up by the
baby unit.