1. Controllers control actuators
2. Actuators report change of status back to controller
3. Sensors report change of status of measured values to controller
4. Sensors directly control actuators
5. Actuators control other actuators
6. Remote controls send signals to static controllers to trigger scenes or other actions
7. Remote controls control other actuators.
There are two different role a controller can have. There is always one single primary controller that is managing the
network and including/excluding devices. The controller may have other functions - like control buttons - as well. All other
controllers don't manage the network itself but can control other devices. They are called secondary controllers. The
image also shows that its not possible to operate a sensor just from a remote control. Sensors only communicate with
static controllers.
Product description
The Z-Wave 4 in 1 Sensor is designed with three detection sensors:
Door-/Window
PIR/Motion
Temperature
Illumination
The Philio Multi Sensor is a Z-Wave door/ window sensor, motion sensor, lighting sensor and temperature
sensor in one package. Thanks to this the PSM02 can be uses as a security device or home automation
device, e.g. to send an alarm when a motion is detected, turn the light on/ off automatically at night or to
adjust the heater.
The product consists of two elements - the detector and the magnet. The magnet is mounted on the moving
part of the window or of the door. The other part is placed on the frame.
Batteries
The unit is operated by batteries. Use only batteries of correct type. Never mix old and new batteries in the
same device. Used batteries contain hazardous substances and should not be disposed of with household
waste!
Battery Type: 1 * CR123A
Installation Guidelines
(c) 2012 Z-Wave Europe GmbH, Goldbachstr. 13, 09337 Hohenstein-Ernstthal, Germany, All rights reserved, www.zwaveeurope.com - pp 2
