Device Reset Locally
1
Highest granted Security Class
Association
2
Highest granted Security Class
Association Group Information
1
Highest granted Security Class
Powerlevel
1
Highest granted Security Class
Basic
1
Highest granted Security Class
Configuration
1
Highest granted Security Class
Notification
8
Highest granted Security Class
Firmware Update Meta Data
4
Highest granted Security Class
Supervision
1
None
Transport Service
2
None
Battery
1
Highest granted Security Class
Sensor multilevel
11
Highest granted Security Class
Wake up
2
Highest granted Security Class
FCC ID: RHHPST07
Disposal
This marking indicates that this product should not be
disposed with other household wastes throughout the EU.
To prevent possible harm to the environment or human
health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material
resources. To return your used device, please use the
return and collection systems or contact the retailer where
the product was purchased. They can take this product for
environmental safe recycling.
Philio Technology Corporation
8F., No.653-2, Zhongzheng Rd., Xinzhuang Dist., New Taipei City
24257, Taiwan(R.O.C)
http://www.philio-tech.com
FCC Interference Statement
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one of
the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
9
