13/10/2019
manual.zwave.eu/backend/make.php?lang=en&sku=PHIEPAT02-B
manual.zwave.eu/backend/make.php?lang=en&sku=PHIEPAT02-B
5/7
Setting
Description
8
Disable send out BASIC OFF after the flood event cleared. (1:Disable, 0:Enable)
16
Notification Type, 0: Using Notification Report. 1: Using Sensor Binary Report.
32
Disable Multi CC in auto report. (1:Disable, 0:Enable)
64
Disable to report battery state when the device triggered. (1:Disable, 0:Enable)
Parameter 10: Auto Report Battery Time
The interval time for auto report the battery level. 0 means turn off auto report.The default value is 12. The tick time can setting by the configuration No.20.
Size: 1 Byte, Default Value: 18
Setting
Description
0 - 127
The interval time for auto report the battery level.
Parameter 13: Auto Report Temperature Time
The interval time for auto report the temperature. 0 means turn off auto report.The default value is 12. The tick time can setting by the configuration No.20.
Size: 1 Byte, Default Value: 18
Setting
Description
0 - 127
The interval time for auto report the temperature.
Parameter 14: Auto Report Humidity Time
The interval time for auto report the humidity. 0 means turn off auto report.The default value is 12. The tick time can setting by the configuration No.20.
Size: 1 Byte, Default Value: 18
Setting
Description
0 - 127
The interval time for auto report the humidity.
Parameter 20: Auto Report Tick Interval
The interval time for auto report each tick. Setting this configuration will effect configuration No.10, No.13, No.14 and No.15.Units of one minute.Caution1: Setting
to 0 means turn off all auto report function.Caution2: The value is unsigned byte
Size: 1 Byte, Default Value: 30
Setting
Description
0 - 255
The interval time for auto report each tick.
Parameter 21: Temperature Differential Report
The temperature differential to report.0 means turn off this function. The unit is Fahrenheit.Enable this function the device will detect every 10 seconds. And when
the temperature is over 140 degree Fahrenheit, it will continue report.
Size: 1 Byte, Default Value: 1
Setting
Description
0 - 127
The temperature differential to report. 0 means turn off this function.
Parameter 23: Humidity Differential Report
The humidity differential to report.0 means turn off this function. The unit is percentage.Enable this function the device will detect every 10 seconds.
Size: 1 Byte, Default Value: 5
Setting
Description
0 - 60
The humidity differential to report.
Technical Data
