Copyright © 2019, Fast ČR, a. s.
Revision 12/2019
EN - 11
PART 6: ELECTRICAL REQUIREMENT
WARNING!
DO NOT REMOVE GROUND PRONG.
DO NOT USE AN ADAPTOR.
DO NOT USE EXTENSION CORD.
Failure to follow these instructions can result in death, fire or electrical shock.
Before you move your refrigerator into its final location, it is important to make sure you have the proper
electrical connection.
Recommended Earthing Method
A 220 ~ 240 Volt /50 Hz AC only 10 ampere fused and properly earthed electrical supply is required. It is
recommended that a separate circuit serving only this appliance be provided. Use a receptacle which cannot
be turned off with a switch or pull chain. Do not use an extension cord.
NOTE!
Before performing any type of installation, disconnect the refrigerator from the electrical source. When you
are finished, connect the refrigerator to the electrical source and reset the control to the desired setting.
PART 7: LEVELING
If the refrigerator is not leveled during installation. The doors may not close or seal properly, causing cooling,
frost, or moisture problems. It is very important of the refrigerator to be level in order to function properly.
To level your refrigerator you may either turn the level leg clockwise to raise that side to the refrigerator or
turn counter – clockwise to lower that side.
NOTE!
Having someone push against the top of the refrigerator take some weight off the leveling leg. This makes
it easier to adjust the leveling leg.
