Philco PTB 94 FW, Manual

Page: 22 / 146

Copyright © 2019, Fast ČR, a. s. Revision 07/2021
EN - 20
PART 9: TROUBLESHOOTING
WARNING
Before trouble shooting, disconnect the power supply. Only a qualified electrician of competent person
must carry out the trouble shooting that is not in the manual.
Important!
Repairs to refrigerators/freezers may only be performed by competent service engineers. Improper repairs
can give rise to significant hazards for the user. If your appliance needs repairing, please contact your
specialist dealer or your local Service Center.
PROBLEM POSSIBLE CAUSE(S) SOLUTION
Appliance does not
work.
Appliance is not switched on. Switch on the appliance.
Mains plug is not plugged in or is
loose.
Insert mains plug.
Fuse has blown or is defective. Check fuse, replace if necessary.
Socket is defective.
Mains malfunctions are to be
corrected by an electrician.
Appliance cools too
much.
Temperature is set too cold.
Turn the temperature regulator to a
warmer setting temporarily.
The food is too warm.
Temperature is not properly adjusted.
Please refer to the “Control panel”
section.
Door was open for an extended
period.
Open the door only as long as
necessary.
A large quantity of warm food was
placed in the appliance within the last
24 hours.
Turn the temperature regulation to a
colder setting temporarily.
The appliance is near a heat source.
Please look in the “Installing your new
appliance” section.
Interior LED Light does
not work.
LED Light is defective.
Please look in the “cleaning and care”
section.
Heavy build-up of frost,
possibly also on the
door seal.
Door seal is not air-tight (possibly after
reversing the door).
Carefully warm the leaking sections
of the door seal with a hair dryer (on a
cool setting). At the same time shape
the warmed door seal by hand such
that it sits correctly.