EN - 7
04/2016
Copyright © 2016, Fast ČR, a. s.
PART 4: FIRST USE AN INSTALLATION
Cleaning before use
•
Before using the appliance for the fi rst time, wash the interior and all internal accessories with lukewarm
water and meutral soap in order to remove the typical smell of a brand new product, then dry thoroughly.
Installation Positioning
WARNING!
Before installing, read the instruction carefully for your safety and the correct operation of appliance.
•
Position the appliance away from sources of heat such as stoves, radiators, direct sunlight, etc.
•
Maximum performance and safety are guaranteed by maintaining the correct indoor temperature for the
class of unit concerned, as specifi ed on the rating plate.
•
This appliance performs well from N to T. The appliance may not work properly if it is left for a longer period
at a temperature above or below the indicated range.
Climate class
Ambient temperature
SN
+10°C to +32°C
N
+16°C to +32°C
ST
+16°C to +38°C
T
+16°C to +43°C
Important!
It is necessary to have good ventilation around the fridge to allow for the dissipation of heat, high
effi
ciency an low suffi
ciently cleared space should be available around the fridge. It is advisable for there to be
75 mm separating the back of the fridge to the wall at least 100 mm of space on its two sides, a height of over
100 mm from its top and a clear apace in front to allow the doors to open 160°.
•
Appliances must not be exposed to rain. Suffi
cient air must be allowed to circulate in the low rear section
of the appliance, as poor air circulation can aff ect performance. Built-in appliances should be positioned
away from heat sources such as heaters and direct sunlight.
