CLOCK FUNCTIONS
Electronic programmer
3
4
5
2
1
1
1
Function indicators
2
Time display
3
Button
+
4
Selection button
5
Button
-
Clock function
Application
Time of day
To set, change or check the time of day.
Minute Minder
To set a countdown time. This function has no effect on the opera-
tion of the oven.
Duration
To set how long the appliance must operate.
End
To set when the appliance must be deactivated.
You can use Duration
and End
at the same time to set the time when
the appliance must be activated and
then deactivated. First set Duration
,
then End
.
Setting the clock functions
1.
For Duration
and End
, set an
oven function and temperature. This is
not necessary for the Minute Minder
.
2.
Press the Selection button again and
again until the indicator for the neces-
sary clock function flashes.
3.
Press
+
or
-
to set the time for the nec-
essary clock function.
The display shows the indicator for the
clock function you set. When the set
time ends, the indicator flashes and an
acoustic signal sounds for two minutes.
With the Duration
and End
func-
tions, the appliance deactivates auto-
matically.
4.
Press a button to stop the signal.
5.
Turn the knob for the oven functions
and the knob for the temperature to the
off position.
Cancelling the clock functions
1.
Press the Selection button again and
again until the necessary function indi-
cator flashes.
2.
Press and hold the button
-
.
The clock function goes out after some
seconds.
USING THE ACCESSORIES
Warning!
Refer to the Safety chapters.
7
Summary of Contents for POB90
Page 1: ...User manual Oven POB90...
Page 20: ...892954540 A 242013...
