Philco PMDI 32, User Manual

Page: 11 / 44

9
B
B B
BASIC CONTROLS
ASIC CONTROLS ASIC CONTROLS
ASIC CONTROLS
Setting the clock
The clock display will flash to indicate that the time shown is not correct. To set the
clock, proceed as follows:
1. Select the Clock Symbol with the Parameter selection keys (not necessary if your
microwave oven is first plugged in or after a power failure) .
2. Set the hours with Plus and Minus keys .
3. Confirm the selection with the Confirmation key .
4. Set the minutes with the Plus and Minus keys .
5. Confirm the selection with the Confirmation key .
Hiding/Displaying the Clock
If the clock display disturbs you, you can hide it by proceeding as follows:
1. Press and hold the Confirmation key for 3 seconds. The clock will be hidden but the
dots between the hours and the minutes will flash once per second.
2. To show the clock again, repeat the described procedure again.
1
2
3 4
5
6
1 2 3 0
1
2
3 4 5
6
1
11
1
1 11 1
4 44 4
1 11 1
4
44
4
3 33 3