Copyright © 2020, Fast ČR, a. s.
Revision 12/2020
7
EN
PART 4: FIRST USE OF THE MACHINE
Before the first time using, please boil up the water for twice without any additives.
1. Fill the electrical kettle with water. Do not overfill, keep the water level under the MAX marks.
2. Place the kettle on the base.
3. Check whether the electrical voltage that you intend to use is the same as the electrical kettle.
Details are to be found on the rating label on the base of the kettle.
4. Switch the machine to position “1” to start.
5. After boiling, the electrical kettle will switch off automatically. Take the electrical kettle away from
the power cord base.
6. Do not open the lid when pouring out the water.
PART 5: CLEANING
Before your cleaning, please unplug the electrical kettle and make sure it has been cooled
down. Never immerse any part of the cable, plug, power cord base or kettle in water or any
other liquid.
Exterior of the kettle
Wipe the exterior of the kettle with a piece of damp cloth and then dry it with a piece of dry cloth.
Never use harsh chemicals or abrasive cleaning agents as these may damage the finish of your kettle.
Interior of the kettle
Over using a period of time, lime scale would be built up inside of your kettle.
To remove lime scale:
1. Half fill the kettle with water and add the juice of a lemon.
2. Boil up the water and allow it to stand for 15 minutes before discarding.
3. Repeat steps 1 and 2 several time, please using cold water only.
Then the lime scale inside of your electrical kettle will be clean up..
PART 6: TECHNICAL SPECIFICATIONS
Capacity
1,7
l
Rated voltage range
220 - 240 V
Rated frequency
50 / 60 Hz
Rated power consumption
1850 - 2200 W
Cable length
75 cm
Summary of Contents for PHWK 1730
Page 2: ......
