9
11/2018
EN
III. Only heating separately, without frothing.
1.
Place the appliance on a fl at surface.
2. Select mixing paddle according to your task. Then open the lid, insert the mixing paddle onto the shaft on
the bottom of jar.
3. Fill the jar with the desired amount of milk (the initial temperature of milk is 5-10°C), and replace the lid.
NOTE:
the max milk quantity permitted to add is 200ml, to avoid milk overfl owing after mixing or
frothing.
4. Place the jar on the power base and connect the plug into a power outlet. The indicator will illuminate
red.
5. Press the switch button once, the indicator will light blue. Then the appliance will start to work. Once the
temperature of milk has achieved about 65±10
°
C, the heating element will stop heating and the mixing
paddle will stop rotating automatically; the indicator will illuminate red again until unplugging the power
outlet.
NOTE:
The rotation of mixing paddle is only used for avoiding sticking. It will not froth the milk.
6. When the appliance has stopped operating, open the lid, pour out the warm milk and enjoy it.
CAUTION: Minimum 3 minutes rest time must be maintained between two continuous cycles, otherwise,
the appliance will enter self-protection state automatically after working for 5 cycles continuously, the
indicator will be illuminated blue and fl ash, the switch button will not be activated, after about 5 minutes,
the appliance will enter standby state and you can continue operating the appliance.
7. Always turn off the milk frother and disconnect the power supply when not use.