13
Operation
When plug into power socket,all indicators and digital tube illuminate and go out after 1
seconds,and the buzzer will alarm 3 times.
1
、
POWER
—switch on/off.
（
a
）
、
Press the “ON/OFF” button to turn on the unit. One time beep signal can be heard. The
airplate startup automatically at 90 degree,and the indicator of run,high speed,dehumidify
illuminate and ambient humidity is displayed on digital tube.and the unit is in the status of
constant dehumidifying
（
b
）
、
Press the “ON/OFF” button again, one time long beep signal can be heard. the unit will stop
working and the airplate close.
2
、
SPEED
—press “SPEED” to make it circulating among low-high-low····
3
、
DEHUM
—press “DEHUM” to make it circulating among
continuous-40%-45%-50%-55%-60%-65%-70%-75%-80% -continuous····
（
Note
：
Press
“MODE” to make the dehumidify indicator illuminated before setting humidity ratio
）
4
、
SWING
—When appliance is powered on, press to oscillate airplatevautomatically. Press again to fix
a stationary angle.
5
、
MODE
（
a
）
、
Press the mode key for the first time to choose the dry mode
，
in this mode,the dry indicator
illuminates and the fan motor runs at high speed .
（
b
）
、
Press the mode key for the second time to choose the DEHUM mode
，
in this mode, the
dehumidify indicator illuminates and
press “DEHUM” to make it circulating among
continuous-40%-45%-50%-55%-60%-65%-70%-75%-80% -continuous····
6
、
TIMER(Hr)
—set time for swtich on/off automatically and 1h
、
2h
、
4h
、
8h
、
no timer can be setted
。
（
a
）
、
When appliance is powered off or in standby state,press this key to set time circulating among
1h~2h~4h~8h~no timer~1h
… for swtich on,and corresponding timer indicator illuminates.
（
b
）
、
When appliance is powered on, press this key to set time circulating among 1h~2h~4h~8h~no
timer~1h
… for swtich off. and corresponding timer indicator illuminates.
7
、
Water-full
When the watertank is full, the compressor and fan stop working and the buzzer will alarm 10
times.the water-full indicator illuminates all the time.
8
、
Protection of compressor
When the compressor shut off, it takes 3 minutes to rework for protection period.
(Note
：
The run indicator still illuminates )
9
、
Memory function
（
a
）
、
When switch on the unit again after switching off
（
don’t unplug the plug
）
，
the unit will memorize
the last setted mode automatically and recover back to the last setted mode.
（
b
）
、
If power supply is cut off when the appliance is running ( unplug the plug) , once power
restoration ,the unit runs at continuous dehumidify mode automatically.
Summary of Contents for PDY25P
Page 2: ...2 主要部件 控制面板 乾燥空氣出口 提手 濾網 排水管出口 抽取式水箱 插头和电线 排水口 排水管 ...
Page 16: ...16 ...
