12
4
、
DEHUM
—press “DEHUM” to make it circulating among
continuous-40%-45%-50%-55%-60%-65%-70%-75%-80% -continuous····
Note:·
①
、
If power supply is cut off when the appliance is running, once power
restoration,the unit is default setted to restart at
②
、
When in dry mode,the dehumidify and
speed key are out of function,and press dehumidify key for 5 seconds,the ambient
temperature ratio will be displayed on nixie tube.
③
、
Press the dehumidify key to set
desired humidity ratio, The settings will be scrubbed off within 3 seconds of no action and
current ambient humidity will be displayed on digital tube.
④
、
Press dehumidify key for 5
seconds,the ambient temperature ratio will be displayed on nixie tube.
⑤
、
When ambient
humidity
<
30%RH
,“LO”mark will be displayed on nixie tube; When ambient humidity
>
90%RH
, “HI”mark will be displayed on digital tube
.
⑥
、
Each gap of humidity setting is 5%,
⑦
、
When“DEHUM”indicator illuminates,
5
、
SWING
—setting airplate openning or closing.
Note:
①
、
When in water-full status
,
the airplate will be closed automatically.
②
、
When the
unit runs
,
in any mode,the swing can be setted.
6
、
MODE
—Dry mode or dehumidify mode can be setted.
7
、
TIMER(Hr) INDICATOR
8
、
FULL INDICATOR
—When the watertank is full,this indicator illuminates.
9
、
DEFROST INDICATOR
—
①
When the unit is defrosting ,the defrost indicator illuminates
②
、
When
the NTC on the evaporator is open circuit or short circuit, this indicator will twinkle
;
③
、
When the NTC on the evaporator detects the copper’temperature
>
40
℃
, the defrost
indicator twinkle 2 times and illuminate 1 time.
④
、
When the temperature&humidity sensor
detects ambient temperature ≥40
℃
and the NTC on the temperature&humidity sensor is
short circuit, the run indicator and the defrost indicator illuminate at the same time.
10
、
RUN INDICATOR
—
①
、
When the unit runs ,this indicator illuminates
②
、
When the T&H sensor
detects ambient temperature
≤5
℃
,this indicator twinkle
③
、
When the temperature&humidity
sensor
detects ambient temperature ≥40
℃
and the NTC on the temperature&humidity
sensor is short circuit, the run indicator and the defrost indicator illuminate at the same time.
11
、
HIGH INDICATOR
—When the fan motor runs at high speed ,this indicator illuminates
12
、
LOW INDICATOR
—When the fan motor runs at low speed ,this indicator illuminates
13
、
DRY INDICATOR
—When this indicator illuminates ,the fan motor runs at high speed automatically.
14
、
DEHUM INDICATOR When the unit runs at given humidity or continuous dehumidification, this
indicator illuminates .
15
、
DIGITAL TUBE
—
①
、
When the DEHUM
indicator don’t illuminate, press the DEHUM key ,the
ambient temperature is displayed on digital tube
②
、
Press the DEHUM key for 5 seconds, the
digital tube shows ambient temperature, if press the DEHUM key all the time, the digital tube
shows ambient temperature all the time and stop pressing the key ,the digital tube shows
ambient humidity
③
、
When the DEHUM indicator illuminates, press the DEHUM key, the
ambient humidity is displayed on digital tube
④
、
When the T&H sensor isn’t connected, the
mark “CO” twinkle on the digital tube and the unit keep running at continuous dehumidification
status.
Summary of Contents for PDY25P
Page 2: ...2 主要部件 控制面板 乾燥空氣出口 提手 濾網 排水管出口 抽取式水箱 插头和电线 排水口 排水管 ...
Page 16: ...16 ...