18
PHILCO
it runs. Do not dry clothes
and other fabric or materials
on the device. It can result
in overheating, breakdown
or damage to your health
and/or property. (Attention!
Manufacturer considers that
such breakdown is not cov-
ered by warrantee).
• Any electrical appliance
should not be left unattended
especially if children are not
kept away from it. Make sure
that children do not touch the
device by hands.
• Before removing the device
and packing it for long
storage make sure that the
housing of the device and its
heating element are cooled.
• The device should be kept
away from flammable or easi-
ly deformable items.
• Do not use device in open
outdoor areas.
• For normal operation of the
device, the mains should
have sufficient voltage and its
technical parameters should
comply with technical spec-
ifications marked on body of
the device.
• In case of any failures apply
to the nearest authorized
service center of manufac-
turer for advice and repair
(addresses of service centers
are provided in warrantee
certificate or on our web-site
www.serviceworld.gr).
• Do not disassemble the
device.
• Unplug the device when it is
not use or before washing.
Maintenance
The convector does not require any
special maintenance.
Before service operations (mainte-
nance) it is necessary to unplug the
convector.
From time to time it is necessary to
clean the device with soft wipe or
wet sponge. Do not use abrasive,
foam detergents and solvents.
It is not difficult to clean of the
place behind the heater mounted
on the wall. Press two latches (Fig.
4) on the rear panel of the heater
and pull the heater forward. The
heater is removed it is possible to
wash the wall.
After cleaning install the heater in
its normal operating position.
Recommended room temperature
and humidity:
а) for operation:
From -25 to +30°С, humidity from
40 to 90%;
b) for storage: From -20 to +80°C,
humidity from 40 to 90%.
