Philco PCF-440X, User Manual

Page: 27 / 44

27
INSTALLATION
Location
When selecting a position for your Fridge/Freezer you should make sure the floor is flat
and firm, and the room is well ventilated with an average room temperature of between
16
℃
and 43
℃
. Avoid locating your Fridge/Freezer near a heat source, eg, cooker, boiler
or radiator. Also avoid direct sunlight in out-buildings or sun lounges. If you are placing
your Fridge/Freezer in an out-building such as a garage or annex ensure that the
Fridge/Freezer is placed above the damp course, otherwise condensation will occur on
the Fridge/Freezer cabinet. Never place the Fridge/Freezer in a wall recessed or into fitted
cabinets or fumiture when your Fridge/Freezer is working, the grille at the back may
become hot and the sides warm. It must therefore be installed so that the back of the
Fridge/Freezer has at least 9cm(31/2”) of free space and the sides have 2cm(3/4”). Do not
drape the Fridge/Freezer with any covering.
Leveling the Fridge/Freezer
If the Fridge/Freezer is not level, the door and magnetic seal alignment will be affected
and may cause you Fridge/Freezer to work incorrectly. Once the Fridge/Freezer is placed
in its final location, adjust the leveling feet at the front by turning them.
Cleaning before use
Wipe the inside of the Fridge/Freezer with a weak solution of bicarbonate of soda. Then
rinse with warm water using a damp sponge or cloth. Wash the baskets and shelves in
warm soapy water and dry completely before replacing in the Fridge/Freezer. The external
parts of the Fridge/Freezer can be cleaned with wax polish.