manualshive.com logo in svg

Phil & Teds LATCH BASE, Instructions Manual

Share
Download
Phil & Teds LATCH BASE Instructions Manual Download Page 27

Instructions

• 

Push down on the foot end of LATCH base and pull the 
shoulder belt to tighten LATCH base against the vehicle 
seat. 

• 

Close the lock-off over the lap/shoulder belt until it clicks 
into place. CHECK to make sure LATCH base is secure by 
holding both sides of the LATCH base near the vehicle belt 
and moving it from side to side and front and back. The lap/
shoulder belt should not loosen and the LATCH base should 
not move easily. The LATCH base should not move more 
than 1 inch (2.5 cm) from side to side or front to back. 

• 

Attach the infant car seat into the LATCH base until you hear 
a click. Lift up on the handle of the infant car seat to make 
sure that it is securely attached in the LATCH base. 
 
If the infant car seat does not latch securely into the LATCH 
base, CHECK to make sure green is visible on the indicators 
before installing the infant car seat onto the LATCH base. If 
green is NOT visible pull up on red release handle. ALWAYS 
lift up on the infant car seat to check that it is securely 
attached to LATCH base.

3

5

4

3

4

5

Summary of Contents for LATCH BASE









































Reviews:

No comments

Brands by name

Popular brands

Load more brands