Phil & Teds alpha Series Manual For Future Reference Download Page 10 | Manualshive

Page: 10 / 44

background image

Safety Warnings

• NEVER place two LATCH connectors on one vehicle LATCH anchor.
• DO NOT allow children to play with the vehicle seat belts. A child

within reach of a seat belt may become entangled if he or she pulls
the seat belt all the way out and wraps the belt around his or her
head, neck, or waist.

WHEN NOT USED IN A VEHICLE

• NEVER LEAVE child unattended.
• SUFFOCATION HAZARD: Infant car seat can roll over on soft

surfaces and suffocate child. NEVER place infant car seat on beds,
sofas or other soft surfaces.

• STRANGULATION HAZARD: Child can strangle in loose restraint

straps. Always use harness. NEVER leave child in infant car seat
when straps are loose or undone.

• Children have STRANGLED in loose or partially buckled harness

«
...
8
9
10
11
12
...
»

Summary of Contents for alpha Series













































Reviews:

No comments

Related manuals for alpha Series

Brand: Graco Pages: 35

2274270-NO0535-S65

Brand: NORAUTO Pages: 80

Brand: JAKO-O Pages: 32

Sparco Pro 2000

Brand: FANATEC Pages: 7

Alpha omega all in one

Brand: Safety first Pages: 30

Heritage Premium

Brand: Quadratec Pages: 6

Trunki Boostapak

Brand: Safety 1st Pages: 10

Brand: BabyLove Pages: 29

Brand: Chipolino Pages: 6

Brand: Chipolino Pages: 8

LITTLE TRAVELER

Brand: KIKKA BOO Pages: 44

Brand: KIKKA BOO Pages: 44

Brand: KIKKA BOO Pages: 46

Brand: KIKKA BOO Pages: 51

Brand: KIKKA BOO Pages: 52

Brand: KIKKA BOO Pages: 69

Brand: KIKKA BOO Pages: 70

Brand: KIKKA BOO Pages: 87

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands