150Mbps Wireless N Router
www.phicomm.com
19
Chapter 3: Router Configuration
change the wireless channel if you notice interference problems with another nearby access
point, or the wireless performance is not as good as you expected.
SSID Broadcast:
If you choose Enabled, the wireless router will broadcast its name (SSID).
Channel Bandwidth:
The bandwidth of the wireless channel, you can select 20MHz or
20/40MHz.
Wireless Security Settings
You can configure the security of your wireless network(s) in this page. There are six wireless
security modes supported by this router: Open, Shared, WEPAUTO, WPA-Personal, WPA2-Personal,
and WPA- Personal / WPA2-Personal.
Wireless Network Name (SSID): Select the SSID which you want to enable the security.
Security Mode: You can choose Disable, Open, Shared, WEPAUTO, WPA-Personal,
WPA2-Personal, WPA- Personal/ WPA2-Personal.
Mode 1: Security Mode > Disable
If you do not want to use wireless security, highlight on this option. That means other people
can connect to your wireless network without entering any password, so it may slow down your
internet speed, it’s recommended strongly to choose one of the following modes to enable
security.
Mode 2: Security Mode > Open/Shared/ WEPAUTO
Open System: Select 802.11 Open System authentications.
