The second unit, should at the same time as the fi rst unit, enter programming mode
by pressing and holding the function button for 1s. Similarly, the amber light will fl ash
on the second unit and a tone will sound in the headset when its in programming
mode.
Unit 2
If the user does not wish to accept the connection, they can simply disconnect by
clicking the push to transmit button twice.
Storing to different memory locations
A user may select where to store a caller ID by simply:
a) pressing once for the fi rst memory location
b) press twice for the second memory location
c) press and hold for the remote radio or communications equipment
Step 1 - Press the function button for 1s to enter
programming mode - to be discovered.
The amber light will fl ash and a tone will sound in
the headset.
Step 2 - When the user has connected to the caller,
they can choose to save the caller ID to a memory
location. Pressing the plus button once will store
the caller to the fi rst memory location.
Programming
The programming mode allows users to set up a virtual network to communicate
with peers and access long haul radio communication equipment, with a seemless
transition. It is the fi rst truly wireless communications network giving users real
wireless access to a range of communication gateways, without the need for
infrastructure (between 30m and 180m).
The important thing to remember about programming, is that two units must be
programmed at the same time. The programming method allows users to ensure
they are connected to the correct person, before allocating that person to a memory
location.
Programming mode
The programming mode allows the user to store 3 caller ID’s from other units.
Storing a single unit
Programming is performed between two units.
Unit 1
Step 1 - Enter Programming mode by pressing the
function button - to search.
The amber light will fl ash quickly and a tone will
sound in the headset. Once the units have been
connected, then the user can either program the
other caller ID to memory by pressing the plus key,
or disconnect from the call with a double click on
the PTT.
Step 2 - A single press of the plus button will store
the caller ID to the fi rst memory location.
Alternatively if the other unit is not found then a
time - out tone will be heard.
6
13
14