Phiaton 900 LEGACY, Owner'S Manual, Page: 7 / 16

7
6. NOISE CANCELLING FUNCTION
※
A2DP-“Advanced Audio Distribution Profile”, HSP-“Headset Profile”, HFP-“Hands Free Profile”.
AVRCP-“Audio/Video Remote Control Profile”
※ The device will not operate properly if the profiles are not supported equally.
Even when the profiles are supported equally, some features may not properly operate depending on the
‘Bluetooth Device’ specifications. To check the detail specifications of this headphone’s profile, refer to
‘14. SPECIFICATIONS’. For more information, please visit phiaton.com or contact Phiaton customer service.
1) What is ‘Multipoint Connection’?
- This is a feature where 900 LEGACY’s user can simultaneously connect two Bluetooth devices.
2) Multipoint Connecting
- Turn on the Bluetooth feature within the two ‘Bluetooth Devices’ you want to connect with 900 LEGACY.
- Refer to 5. PAIRING WITH A ‘BLUETOOTH DEVICE’ to pair the first device with the 900 LEGACY.
- Press and hold the POWER Button again for 5 seconds to enter ‘Pairing Mode’.
(Here, the first device becomes disconnected.)
- Once ‘Pairing Mode’ has been entered, pair the second device. - Within the first ‘Bluetooth Device’ you want to
connect, select ‘900 LEGACY’ again.
- Now, both of the ‘Bluetooth Devices’ will be connected simultaneously, and now the ‘900 LEGACY’ will control
the secondly paired device.
※ Sleep Mode will be entered when devices are not connected within 1 minute. When trying to connect a device
while in Sleep Mode, pressing any button will re-enter ‘Connection Waiting Mode’ where connection is possible.
※ When the 900 LEGACY power is turned off and back on, the first and second paired device will automatically be
connected.
2
1
1
2
1
2
※ Upon Multipoint Connection, the features operated within 900 LEGACY usually operate within the first paired
device. (When using the second paired device, it is possible to operate the device from 900 LEGACY.)
※ When using Multipoint Connection, the order of the paired devices may change.
To change the order, re-connect the device you usually use.