Phiaton 900 LEGACY Owner'S Manual Download Page 10

10

11. ACCEPTING / MAKING A CALL WHILE PLAYING MUSIC

1) Accepting a Call
- When an incoming call tone is heard through the headphones, quickly double tap the touch control panel or press 
   the POWER button. (Volume control: While on a call, use the touch panel to control volume.)
2) Ending a Call
- While on a call, quickly press the POWER button or quickly double tap the touch control panel to end the call.
3) Rejecting a Call
- When an incoming call tone is heard through the headphones, press and hold the POWER button for about 1 second.
   (After hearing the ‘beep’ signal tone, the incoming call is rejected and the voice guidance “Call Ignored” is heard.)
4) Call Waiting
- When receiving another incoming call while on a call.
   (Supported only when having applied for this service with your telecom provider.)
- Press and hold the POWER button for about 1 second to place the current call on call waiting and connect the second call.
   (Press the POWER button again for about 1 second to switch between the waiting call and connected call.)
- Shortly press the POWER button to end the current call and connect the second call.
5) Switching between Mobile Phone to 900 LEGACY
- To switch the call from mobile phone to the headphone, press the POWER button for 1 second.

Status

LED Indicator

Incoming Bell/Outgoing Bell

Purple light blinks in 1.5 second intervals

During Call

Blue light slowly blinks every 6 seconds

When there are two calls connected

Purple light slowly blinks every 6 seconds

Battery use time

※ 

The above times may differ depending on the environment in which it is used.

Status

Noise Cancelling ‘ON’

Call Time

Max. 39 hours

Music Play Time

Max. 43 hours

Standby Time

Max. 320 hours

10 min. Charging

Max. 4 hours

Full Charging Time

About 3.3 hours

Summary of Contents for 900 LEGACY

















Reviews: