Phiaton 900 LEGACY, Owner'S Manual, Page: 5 / 16

5
2) Connection Waiting Mode
- When power is turned on, ‘Connection Waiting Mode’ will start if ‘Pairing Mode’ cannot be entered
or the headphones cannot connect with ‘Bluetooth Device’.
- If the ‘Bluetooth Device’ is not connected within 5 minutes in ‘Connection Waiting Mode’,
the headphones will automatically turn off.
※
At Connection Waiting Mode, the headphone should be entered to ‘Pairing Mode’ for connection to
‘Bluetooth device’ again after power off. If not, 900 LEGACY will turn off within 5 minutes after starting
‘Connection Waiting Mode’.
32:
(5
1&
32:(5
1&
(5
1&
w
v
~
l
y
uj
w
v
~
l
y
uj
w
v
~
l
y
uj
wv
~l
y
uj
wv
~l
y
uj
ly
uj
3. CHARGING
The device may have low battery and should be charged before first use.
1) Connect the provided USB charging cable to 900 LEGACY.
2) Connect the provided USB charging cable with a computer (laptop) or you may also use an USB adaptor
(purchased separately) with a minimum rating of 5V (over 500mA).
1) Power ON/OFF
- Press and hold the ‘Power’ Button for 2 seconds to turn the power on.
- When turning the power off, press and hold the POWER Button for 2.5
seconds to turn off.
Operation
LED indicator
Charging Red Light
Charging complete Blue Light
Status Operation LED Indicator Notice
ON
Press and hold the POWER
Button for 2 seconds After Purple light,
Blue light blinks 2 times
Sound effect
OFF
Press and hold the POWER
Button for 2.5 seconds
Red light blinks 5 times Sound effect
Status LED Indicator
Connection Waiting Mode Blue light blinks twice in 6 second intervals
4. POWER ON/OFF AND HEADPHONE CONNECTION WAITING MODE
※ When powering on for the first time after purchase, pairing mode is automatically activated.
USB Charging cable
- This device has a built-in battery, and will begin charging
automatically when you connect the charging cable.
Power ON/OFF
ON: 2 Seconds
OFF: 2.5 Seconds