PHI VILLA E02GF-041-BU, Use And Care Manual

Page: 22 / 28

ASSEMBLY INSTRUCTIONS
7
I
H
H
I
E
G
G
J
K
C
Figure 5
Figure 6
Figure 7
Figure 8
5. Attach back panel (C) to back-left leg (G) and back-right leg (H) with bolts (AA) and washer (CC) using hex screw driver (DD),
(see Figure 5).
6. Attach gas cylinder support (K) to back-left leg (G) and back-right leg (H) and front-left leg (J) and front-right leg (I) with bolts (BB)
and washer (CC) using hex screw driver (DD), (see Figure 6).
8. Attach the door handle (N) to the door panel (E) with the bolt (EE) using a Phillips screwdriver (NOT included), (see Figure 8).
7. With the help of another person, carefully turn the fire pit to the upright position. Attach the door panel (E) to the front right leg (I)
by aligning the hinge on the door panel with those on the front right leg (I) and inserting the pins in the hinges, (see Figure 7).
DD
AA
CC
BB
DD
CC
E
N
Hardware Used
AA Bolts (M6 x 12) x 4
CC Washer (M6) x 4
DD Hex screw driver x 1
NOTE: DO NOT tighten the screws completely.
Hardware Used
BB Bolts (M6 x 15) x 4
CC Washer (M6) x 4
DD Hex screw driver x 1
Hardware Used
EE Bolts (M4 x 10) x 1
NOTE:
Tighten all screws completely.
LIFE GETS BETTER WITH PHI VILLA