Phenix Lighting (Xiamen) Co., Ltd
Create and share
14.04.2022
PDS
7/7
No.89-3, Xiyuan Road, Xinyang Industrial Zone, Haicang, 361028 Xiamen, China.
Tel: 0086-592-6892619
Fax: 0086-592-6892289
Web: www.phenixlighting.com
SAFETY INSTRUCTIONS
1. To prevent electric shock, switch off the mains power supply until installation is complete and AC power is
supplied to this product.
2. This product requires an un-switched AC power supply of 120-277V, 50/60Hz.
3. Make sure all connections are in accordance with the National and any local regulations.
4.To reduce the risk of electrical shock, disconnect both normal and emergency power supplies and connector
of this product before servicing.
5. The product can operate with most LED lamps. For normal operation and emergency operation of LEDs, no
need an extra LED driver. The emergency power and time are selectable.
6. This product is suitable for use in dry or damp locations. Do not mount it near gas, heaters, air outlets or
other hazardous locations.
7. Use this product in 0°C minimum, 50°C maximum ambient temperatures.
8. Use caution when servicing batteries.
Do not attempt to dismantle the batteries. Batteries
'
acid can cause
burns to skin and eyes. If acid is spilled on skin or in eyes, flush acid with fresh water and contact a physician
immediately.
9. As this product contains batteries, please be sure to store it in an indoor environment between -20°C ~
+30°C. It must be fully charged and discharged every 6 months from the date of purchase until it is officially put
into use, then recharged 30-50% and stored for another 6 months, and so on. If the battery is not used for
more than 6 months, it may cause excessive self-discharge of the battery, and the resulting reduction of battery
capacity is irreversible. For products with separate battery and emergency module, please disconnect the
connection between battery and module for storage. Due to its chemical properties, it is a normal situation for
the battery capacity to decline naturally during use. Users should take this into account when choosing
products.
10. The use of accessories equipment not recommended by the manufacturer may cause an unsafe condition.
11. Do not use this product for other than intended use.
12. The product should be mounted at locations and at heights where it will not be easily accessible to
unauthorized personnel.
13. Installation and servicing should be performed by qualified personnel.
14. Ensure product compatibility before final installation. Make sure the polarity is correct when connecting the
batteries. Wiring should be strictly in accordance with the wiring diagram, wiring errors will damage the product.
A case of safety accident or product failure caused by users' illegal operation does not belong to the scope of
customer complaint acceptance, compensation or product quality assurance.
