11
1. INTRODUCTION
The HDMI over HDMI and CAT5e/6/7 Transmitter can convert a
single HDMI input, 2-way IR and RS-232 control and LAN serving to a
single CAT5e/6/7 output and includes a simultaneous HDMI bypass
output. It supports resolutions up to 1080p Full HD, 4K×2K timing, 3D
and multi-channel digital audio formats (such as LPCM 7.1CH, Dolby
TrueHD, Dolby Digital Plus and DTS-HD). The HDMI bypass output can
be connected to an HDMI display or cascaded to another splitter.
The CAT5e/6/7 output can be connected to a CAT5e/6/7 to HDMI
Receiver to extend the operating distance up to 100 meters.
Additionally, the LAN connectivity will allow a 100BaseT network to be
served to smart TVs or games consoles. The Bidirectional Power over
Ethernet (PoE) function provides greater fl exibility in installations.
2. APPLICATIONS
• Household entertainment sharing and control
• Lecture room display and control
• Showroom display and control
• Meeting room presentation and control
• Classroom display and control
3. PACKAGE CONTENTS
• HDMI over HDMI & CAT5e/6/7 with LAN/IR/RS232 & Bidirectional PoE
Transmitter
•
IR Blaster x 1
• 3.5mm Phone Jack to RS-232 Cable
• 24V DC Power Adaptor
• Operation Manual
4. SYSTEM REQUIREMENTS
• Source equipment with HDMI output connector
• Display TV/Monitor with HDMI input connector
• HDMI over CAT5e/6/7 Receivers with industry CAT5e/6/7 cables
2
5. FEATURES
•
HDMI with 3D & 4Kx2K supported, HDCP and DVI compliant
• Simultaneous HDMI and CAT5e/6/7 outputs
• Supports data rate from 250Mbps up to 3Gbps
• Supports wide range of PC resolutions from VGA to WUXGA
and HDTV resolutions up to 4Kx2K (3840x2160@24/25/30Hz and
4096x2160@24Hz)
• Supports LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD
Master Audio transmission (32-192kHz sample rate)
• Supports distances up to 100 meters through CAT5e/6/7 cables
• Supports Ethernet network rate up to 100Mbps
• Can select Standard or TV EDID
• Supports USB service port
• Provides 24V DC power to or received from compatible PoE
Receiver through CAT5e/6/7
• Supports control of devices via RS-232 and 2-way IR
• The 3D signal display follow by display TV’s EDID
• Supports Bidirectional IR PoE
Note:
1. This system was tested with CAT6/23AWG cables, results may vary
with cables of a different specifi cation.
2. The PoE function is designed for powering compatible Receiver
units only non-PoE Receivers will need their own power supply.
Receivers of another brand may not be compatible.
3. Displaying HDMI 4Kx2K resolution require the standard 4Kx2K HDMI
cable and display in order for proper image displaying.
4.
This device obtain the last memory function therefore, the device
will use last CAT5e/6/7 output port's EDID when CAT5e/6/7 output is
not connected to a display after power cycling.
The unit will detect CAT5e/6/7 output's EDID when it obtain a 4Kx2K
EDID and send out the signal accordingly to other output ports. If
the CAT5e/6/7 output is without a 4Kx2K's EDID the unit will detect
all output's EDID and send out the signal that all outputs can
accept.
