PhD Solutions PHD-EXC-505-HDTL-RX, Operation Manual

Page: 7 / 18

3 3
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Transmitter Front and Rear Panels
CAT5 e/6 OUT
HDMI IN IR1 OUT IR2 IN
DC 5V
HDMI to CAT5e/6
with IR
TRANSMIT
TE
R
CAT5e/6 OUT
HDMI IN IR2 IN IR1 OUT
DC 5V
HDMI to CAT5e/6
with IR
TRANSMIT
TE
R
4 5 1 2 3
1
IR1 OUT/Blaster
Connect to the supplied IR Blaster for IR signal transmission to the
source equipment from IR1 IN's IR signal. Place the IR Blaster in direct
line-of-sight of the equipment to be controlled.
2
HDMI IN
Connect to the HDMI input source devices such as a DVD player or a
Set-top Box with HDMI cable or DVI to HDMI cable.
3
IR2 IN/Extender
Connect to the supplied IR Extender cable for IR signal reception
and transmission to IR2 OUT. Ensure that remote being used is within
the direct line-of-sight of the IR Extender.
4
DC 5V
Plug the 5V DC power supply into the unit and connect the
adaptor to an AC outlet.
5
CAT5e/6 OUT
Connect to the Receiver unit with a single CAT5e/6/7 cable for
transmission of all data signals. The yellow LED will illuminate when
both Transmitter and Receiver are connected together with power
supply. The green LED will illuminate when the power supply is
connected to the device.
Plug the 5V Desktop Power Supply Unit with power cord into the
unit and connect to an AC wall outlet for power.