EDID page
①
Set EDID mode to input source, then click “Set” button.
②
Copy EDID from HDMI output port to input source, then click “Set” button.
③
Open EDID file to input source, then click “Set” button.
④
Click “Refresh” button to refresh current EDID mode. It will display
the
current input
source
EDID mode status.
*See 12. EDID Management for more information
Status page
1
2
①
Network Configuration
NET STATUS switch: Obtains the network configuration information, including IP address, Subnet,
Gateway.
DHCP switch:
www.phdsolutions.co
15
MXC-4K862-HDTL-KIT
USER MANUAL
