31
ROUTINE MAINTENANCE
Replacement of fluorescent lamp
Follow the procedure below when replacing a fluorescent lamp. The fluorescent lamp is located
horizontally at upper front of the cabinet [Fig. 1].
It is recommended to replace a glow starter when replacing a fluorescent lamp
1.
Turn off the light switch and disconnect the power
supply plug of the refrigerator.
2.
Move the stored items on the top shelf (MPR-722) or in
the top drawer (MPR-722R).
3.
Pull the fluorescent lamp downwards from the stopper
together with the lamp cover and wiring [Fig. 1].
4.
Remove the water-proof cover with the wiring on the
both sides of the lamp cover [Fig. 2].
5.
Take out the fluorescent lamp and insert a new
fluorescent lamp into the lamp cover.
6.
Replace the water-proof cover on the both sides of the
lamp cover and then replace the lamp cover to the stopper.
7.
Replace the stored items on the top shelf or in the top
drawer.
8.
Connect the power supply cord to the outlet and turn on
the light switch to check the lighting of fluorescent lamp.
<Important>
If the unit is unplugged or the power to the unit is
interrupted, do not restart the unit for at least 5 minutes.
This protects the compressor.
Fig. 1
Fig. 2
Water-proof cover
