31
OPTIONAL COMPONENT
Installation of MTR-G3504A or MTR-G3504C
1.
Remove a cap for the fixing screw on the panel cover for
mounting space for a temperature recorder.
2.
Remove the fixing screw and open the panel cover.
(Fig. 1)
3.
Remove the panel cover by pushing the shaft on both
side outward.
4.
Attach the temperature recorder (MTR-G3504A or
MTR-G3504C) to the recorder fixing (MPR-S7: optional
component) by following the instruction shown in the
procedure enclosed with the recorder fixing. (Fig. 2)
5.
Remove the connector cover. Then connect the power
connector on the temperature recorder to the connector on
the unit side. (Fig. 3)
WARNING
Always disconnect the power supply to the unit
to
prevent electric shock or injury since the connector on the
unit is energized.
6.
Mount the recorder fixing with recorder to the mounting
space for a temperature recorder. (Fig. 4)
7.
Fix the recorder sensor to each chamber by using clips,
as mentioned in the procedure for MTR-0621LH and
MTR-4015LH above.
Fig. 1
Shaft
Fixing screw
Panel cover
Recorder
fixing
Connector
Sensor for
refrigerator
Sensor
for freezer
Fig. 2
Fig. 3
Fig. 4
