29
OPTIONAL COMPONENT
Installation of MTR-0621LH
1.
Attach the recorder fixing to the temperature recorder
with two screws. (Fig. 1)
2.
Remove the screws at the right corner on the top of the
unit and fix the temperature recorder to the attachment
position. (Fig. 2)
3.
Remove a rubber cap and insulation covering the
access port on the back of the unit.
4.
Take the recorder sensor into the refrigerator chamber
through the access port.
5.
Fix the recorder sensor on the right wall of the chamber
with the enclosed clips. (Fig. 3)
6.
Arrange the capillary tube so that it cannot disturb the
shelves. Take care not to crush the tube when it is bent.
7.
Make a cut on the rubber cap and pass the capillary
tube through it. (Fig. 4)
8.
Cover the access port with the insulation and rubber
cap.
Note:
The temperature recorder MTR-0621LH can be installed
also at the mounting space for a temperature recorder
(bottom right of the cabinet) if the temperature recorder for
freezer (MTR-4015LH) is not installed. In this case, a
dedicated recorder fixing (MPR-S30) is needed.
For the installation, refer to “Installation of MTR-4015LH”
below.
Recorder
fixing
Fig. 1
Recorder sensor
Fig. 2
Fig. 3
Fig. 4
Capillary
tube
