36
VARIOUS SETTING (MENU/Tools)
Change of compressor delay time (Tools/Comp. Delay)
It is possible to set the time from turning ON this unit until starting its compressor.
Settable range: 3 minutes~15 minutes, factory setting: 3 minutes.
Note:
• This unit has two compressor A and B. The compressor A starts first, after 1 minute the compressor B
starts.
This unit is required a large electric power at the moment its compressor starts. When some units are in a
same room, set so as to be shifted to each other the compressor delay times, to prevent the simultaneous
start of all compressors after power failure.
Table 13. Compressor starting delay time setup process (When the starting delay time of the
compressor is changed from 3 minutes to 5 minutes.)
Description of operation
Key operated
Indication after operation
1
-----
Top screen is displayed.
2 Press the MENU button.
MENU
The menu window is indicated. And the
“set” is highlighted.
3
Press the shift key (downward),
highlight the “Tools” menu window,
and press the ENTER key.
▼
ENTER
Select Tools screen is indicated.
4
Press the shift key (downward),
highlight the Date Time by pressing
ENTER keys.
▼
ENTER
The Date Time screen
is indicated.
5
Select Comp Delay by pressing the
shift key (downward).
▼
The numerical value of the Comp Delay is
highlighted.
6
Press the figure input key in the 0, 5
order.
Comp Delay is changed from 3 to 5.
7 Press the MENU key.
MENU
The menu window is indicated. And the
“OK” is highlighted.
8 Press the ENTER key.
ENTER
Comp Delay time is memorized, and the
Select tools screen is indicated.
9 Press the MENU key.
MENU
The menu window is indicated. And the “OK”
is highlighted.
10
Press the shift key (downward) to
highlight “Cancel” in the menu
window, and press the ENTER key.
▼
ENTER
Top screen is displayed.
0
5
