Introducing AutoFlex Connect
6
Current Sensing Relay Module
(model
RM-2
)
The RM-2 Current Sensing Relay Module has two high-capacity, general-
purpose relays for controlling fans, heaters, lights, or any other equipment that
can be either on or off. Each relay includes a current sensor.
For installation information, read
Connecting equipment to Relay Modules
Relay Module
(model
RM-4
)
The RM-4 Relay Module has four general-purpose relays. The RM-4 does not
have current sensors.
For installation information, read
Connecting equipment to Relay Modules
Variable AC module
(model
VAC-1
)
The Variable AC Module has one variable output for controlling fans, heat
lamps, and heat mats. A temperature probe connector is included for heat mat
control. There is also a connection for a Single-Phase Slave.
For installation information, read
Connecting equipment to Variable AC
For information about Single-Phase Slave units, visit
Variable Chimney Module
(model
VCM-DC
)
The Variable Chimney Module has two DC-signal outputs (0 to 10 V) for
controlling a chimney fan and damper. There is also an input for connecting a
measuring fan.
For installation information, read
Connecting equipment to Variable Chimney
Modules
on page 21.
Variable DC Module
(model
VDC-4
)
The Variable DC Module has four DC-signal outputs (0 to 10 V) for
controlling equipment such as variable frequency drives.
For installation information, read
Connecting equipment to Variable DC
Modules
on page 22.
Summary of Contents for AutoFlex Connect
Page 1: ......
