27
26
4.
Slide the Focus Lock Band onto the lens as far as it can go.
The rear band should be positioned closest to the
camera body and the alignment hole in the rear band is
positioned over the white alignment dot on the lens. The
distance scale window is positioned over the distance
scale of the lens.
5.
Using a 2 mm hex key, tighten the screw on the rear band
using a torque of 15 cNm.
6.
Perform ground calibration until optimal focus has been
achieved.
7.
Using a 2 mm hex key, tighten the screw on the front
band using a torque 15 cNm.
Note: You may remove the lens with the band attached.
The procedure is the same as "Dismounting an iXU Lens" on
page 23.