25
24
3.
Rotate the lens counterclockwise and lift out.
4.
Put a body cap on the camera to protect it or place
another lens on the camera.
Attaching a Focus Lock Band
The focus lock band is used to keep your lens set to the focus
you prefer. Follow the instructions below to secure your lens
to the exact focus you choose.
To attach a Focus Lock Band to your lens:
1.
Check to make sure that both front band and rear band
screws are loosened. If they are tightened, loosen with the
2 mm hex screwdriver that was provided with the camera.
2.
Set the focusing selector ring to either MF or AF.
3.
Slide the plastic clamping ring onto the lens. The hole
on the plastic clamping ring should be aligned over the
white alignment dot of the lens and the opening of the
plastic clamping ring should enable you to read the
distance scale on the lens.