iX Controller MK 5 Installation and Operation Guide
3. Overview
Page 9 of 36
Figure 2. iX Controller MK 5 - Rear Panel
1.
Satellite Tracking LED
3.
PPS Output
2.
Antenna Connector
3.1.1
iX Controller MK 5 Power Overview
The iX Controller MK 5 is powered from a source that meets the following specifications:
•
Voltage
24 - 32 VDC
•
Maximum current
20 A
The Auxiliary power circuit breaker controls all power to the six AUX1 and AUX2 power ports. It also
controls power to the internal GNSS-Inertial. The output voltage from all six power ports is the same as the
incoming voltage from the iX Controller MK 5 power source.
Each set of power ports (AUX1 and AUX2) can be software-controlled using iX Capture.
Power consumption is as follows:
•
Controller - 100 W
•
Each camera (max 6) - 20 W (max 120 W)
•
Controller, multiple cameras and external IMU - 250 W (max)
