23
built-in spring loaded apert u re s .
If you are experiencing variations in the exposure try to
disable the spring-loaded.
The images does not align perfectly in the final stitched image
Even small changes in the camera position or in the camera
tilt and swing settings might have an effect on the accuracy
of the stitched images. Try to reduce the camera movement
in the capture process by using a heavy tripod or a studio
stand. Be careful when sliding the FlexAdaptor from one im-
age position to another and when cranking the shutter.
My final stitched image is darker in the corn e r s
Most lenses have an image circle that by far exceeds the cap-
t u re area of the FlexAdaptor. However most lenses will lack
light in the corners. This might not be seen when shooting
film, but can bee seen using a digital camera. Especially older
lens designs and vide angle lenses has this flaw.
My final stitched image is not sharp in the corn e r s
Most lenses have the highest optical resolution in the center
of the image circle. Then the resolution drops at the edges.
The resolution of a high-end digital back is higher than what
can be achieved on film and there f o re the blurring in the cor-
ners is not likely to be seen when using film. The corner blur
is usually seen when using large tilt and swing move-
ments on the view camera or when using old lenses.
FlexAdaptor Getting Started
