15 |
Page
V1.0
Routing Power Cables
Note:
Continuous metal conduit should be used for all power cables to reduce radiated
electromagnetic interference (EMI). The conduit must be securely grounded to the
converter enclosure converter and the motor case.
Route power cables through the supplied openings in the bottom of the enclosure, using
appropriate conduit or strain relief devices.
Important Note:
If new openings are cut, be sure to completely remove all resulting metal
shavings.
Conduit hubs should be IMC or rigid steel conduit and be UL listed. Conduit hub locations
can be seen in
Figure 10
– PT Small Frame Conduit
Locations
Figure 11
– PT Medium Frame Conduit
Locations
Figure 12
– PT Large Frame Conduit Locations
