ON-LINE RACK
PH 9360 - PH 9301 .
State Mode
Description
Display LCD
Battery mode
When the input voltage is beyond the
acceptable range or power failure,
UPS will backup power from battery and alarm
will beep every 4 seconds.
Bypass mode
When input voltage is within acceptable
range and bypass is enabled, turn off the
UPS and it will enter Bypass mode. Alarm
beeps every two
minutes.
Battery test
When UPS is in AC mode or CVCF mode,
press “Test” key for more than 0.5s. Then
the UPS will beep once and start “Battery
Test”. The line between I/P and inverter
icons will blink to remind users. This
operation
is used to check the battery status.
State Mode
Description
Display LCD
Fault status
When UPS has fault happened, it will display
fault messages in LCD
panel.
.
94 / 100
