3
TM
USER MANUAL
PHOTO•LOC 0-10V CABLE SYSTEM
Allows linking of fixtures together to control light output and photoperiod when used with
controller. Jumper is used between aisles or levels if needed.
Item Code
Description
PTBCCJ16W
PHOTO LOC 0-10V Control Cable 16' Jumper (White)
PARTS LIST
A. PHOTOBIO·TX fixture
B. PHOTOBIO 680W Driver (x1)
C. PHOTO LOC 0-10V Control
Cable 8' Trunk + 5' Branch (x1)
D. Driver fastener (x2)
E. Fixture hanger A (x2)
F. Fixture hanger B* (x2)
G. Driver hanger (x2)
H. User manual (not shown)
CABLE HARNESSES & ACCESSORIES (Sold separately)
CABLE HARNESSES
Power cable harness sold separately based upon your specific requirements
A
B
C
D
F
E
G
Type of Male
Item Code
Description
CHE1063000W
10' F 16AWG WT w/leads, Harness
CHE1063010W
10' F 16AWG WT 110-120V Plug, 5-15P, Harness
CHE1063015W
10' F 16AWG WT 208-240V Plug, 6-15P, Harness
CHE1083020W
10' F 18AWG WT locking 277V, L7-15P, Harness
CHE1083021W
10' F 18AWG WT locking 277V, L7-20P, Harness
Item Code
Description
APDPX2
Autopilot PX2 Advanced Lighting Controller
AUTOPILOT PX2 ADVANCED LIGHTING CONTROLLER
Centralized control of up to 80 PHOTOBIO fixtures. Provides dual zone photoperiod timing,
photosynthetic photon flux scheduling, temperature based auto-dimming, high temp
shutdown, sunrise/sunset simulation, with built in battery backup.
• Avoid direct eye exposure to the light source while it is on.
• Account for small parts and recycle or dispose of packing
material properly.
*Allows truss to run through
fixture body when driver is
remotely mounted
