PFT PFT RITMO, Operating Instructions Manual

Page: 15 / 48

PFT RITMO powercoat 110V Operating Instructions Last updated 12.2006
Knauf PFT GmbH & Co. KG
15
Setting values
Water pressure release:
Machine starts at 1.9 bar
Machine stops at 1.6 bar
The values are permanent and may not be adjusted.
Pressure reducing valve:
1.5 bar at maximum flow rate
Technical specifications
Drive Three phase motor 1.5 kW
Speed range 140 – 575 rpm, continuously adjustable
Control box power supply 110 V alternating current, 50 Hz
Max. power consumption 5.8 A gear motor
Fuse protection 16 A
Power unit Min. 6 kVA
Water supply 1/2 inch, min. 2.5 bar when the machine is
running
Pump output Approx. 0.8 – 3 l/min, continuously adjustable
Pumping distance* Up to 15 m, mineral fillers
Operating pressure Max. 20 bar
Material hopper filling height 900 mm
Material hopper capacity 45 litres
Overall length 750 mm
Overall width 600 mm
Overall height 1,350 mm
Weight of hopper unit 19 kg
Weight of drive with protection grille 25 kg
Weight of frame with control box 40 kg
Weight of mixing shaft 2 kg
Total weight 86 kg
Permanent noise pressure level 77±1 dB(A)
EMC inspection The machine has been EMC-inspected and
complies with the strict requirements of
protection class B. The control box is equipped
with a line filter.
* Approximate value depending on conveying height, material quality, composition and
consistency, pump version and condition.