LOTUS XS 230 V horizontal continuous mixer / Part 2 Overview, operation and service
Operation
5.3.2
Positioning machine
Figure 20: Positioning machine
Install the machine on stable and even ground and secure it against
accidental movements:
Do not tilt or roll the machine away.
Place the machine where it cannot be hit by any falling objects.
The controls must be freely accessible.
Maintain a clearance of approx. 1.5 metres around the machine.
1
Figure 21: Height adjustable support
feet
The machine is adjustable in height:
1. Press the stand spring (1) and adjust the machine to the respective
height (1,010 or 1,150 mm).
5.3.3
Connecting the power supply
Figure 22: Connect power supply.
1. Only connect the machine to a 230 V AC network.
DANGER
Danger to life from electric current!
The electrical connection must be fused correctly:
Only connect the machine to a power source with
an approved RCD (residual current device) of type A
(30 mA).
WARNING
Danger to life from rotating parts!
Improper operation may lead to serious damage to
persons or property.
The relevant drive (motor) may only be operated via
the associated control box of the machine (under-
voltage release).
page 26 / 48