PFM Medical Slide 4004 M Operating Manual Download Page 4 | Manualshive

Page: 4 / 26

background image

4

pfm Slide 4004 M Rev.2022-03-28

Part 1 – Safety instructions

Please read this operating manual carefully before working with the pfm Slide 4004 M. Make

certain that you are familiar with the instrument‘s controls and method of operation. Always

observe the following precautions during operation of the instrument. Failure to do so is contrary

to the recognised technical regulations and the intended use of the instrument.

If the above rule is violated, pfm medical ag shall assume no liability.

Safety instructions

1.1 Key to symbols

Caution! This symbol indicates a possible danger to life and health. Failing to observe these

instructions can result in severe health impacts, including life-threatening injuries.

Indicates useful information

Indicates a dangerous situation

NOTE

WARNING

Manufacturer

Date of manufacture

In vitro diagnostic (IVD) medical device

IVD

Catalogue number

REF

Consult operating manual

PLEASE NOTE

The up-to-date electronic operating manual can be found on our website:

http://www.pfmmedical.com/downloads

«
...
2
3
4
5
6
...
»

Summary of Contents for Slide 4004 M



























Reviews:

No comments

Related manuals for Slide 4004 M

Brand: GE Pages: 802

Brand: iET Pages: 17

Brand: Raymarine Pages: 24

Brand: Hansen Pages: 72

Brand: AAT Pages: 16

Brand: AAT Pages: 40

Platinum Series

Brand: Dairy Tech Pages: 38

Brand: H&S Pages: 34

Brand: QAL Medical Pages: 42

Brand: JB-Lighting Pages: 40

Brand: Califone Pages: 7

Brand: CALITEK Pages: 16

Brand: LAHTI PRO Pages: 20

Brand: LAHTI PRO Pages: 16

Brand: J&M Pages: 53

Brand: Qazqa Pages: 2

Brand: Taylor-Wharton Pages: 25

Brand: i-CAT Pages: 96

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands