ENGLISH
ENGLISH
13
15
16
17
12
14 UNIT START UP
Turn on hot and cold water supplies, and check all connections for leaks.
16 SHOWER HEAD INSTALLATION
Thread Hand Shower (
16A
) onto Hose (
16B
).
Make sure Hand Shower (
16A
) is securely tightened to Hose(
16B
).
15 FINAL FLUSHING
For final flushing, turn valve on and allow water to run through the Tub Spout
(
15A
) for several minutes. Pull Spout Knob (
15B
) up to allow water to run through
Shower Hose (
15C
). Allow water to run for several minutes until all foreign matter
clears the line.
13 TUB SPOUT FUNCTION
When the valve is turned on, water normally flows through the Tub Spout (
13A
).
To activate the shower, turn valve on and pull the Knob (
13B
) up. Hold on until
water flows continuously from the shower arm.
17 HAND SHOWER FUNCTION
To adjust spray, turn switch (
17A
) to a desired spray pattern.
Position 1:
Pause
Position 3:
Pulsating with Shower Spray
Position 2:
Shower Spray
Position 4:
Pulsating Spray
NOTE:
Turn hand shower away from body when switching from pause to spray
setting to avoid possible scalding/extreme cold.
12 VALVE FUNCTION
By rotating the Lever Handle (
12A
) slightly counterclockwise, the valve will be
fully activated to the “COLD” position. The water temperature can be increased
by continuing to rotate the Lever Handle (
12A
) in a counterclockwise direction.
4
UP
For
Shower
13A
13B
15A
15B
15C
16A
16B
17A
FULL HOT
FULL COLD
CLOSED
OPEN
12A
1
2
3
4
