ENGLISH
ENGLISH
10
FAUCET FUNCTIONS
8
9
11
MAINTENANCE & CARE
12
13
8 SECURING FAUCET
Align Faucet (
8A
) to sink surface. From underneath sink, secure faucet and Hose Guide
(
8B
) by using Wingnuts (
8C
). Hand tighten.
9 WATER SUPPLY CONNECTIONS
Connect water Supply Lines (
9A
) to Faucet Inlets (
9B
). Hot water supply lines go into
left inlet. Cold water supply lines go into right inlet. (Supply lines not included). Please
follow manufacturer’s instructions when installing suppy lines.
10 UNIT START UP
Turn on water supply inlet valves and check for leaks.
11 FAUCET FUNCTION
COLD
valve: close-counterclockwise, open-clockwise;
HOT
valve: close-clockwise,
open-counterclockwise. The Spout (
11A
) can be rotated around the Faucet Body in
any direction.
12 SIDE SPRAY OPERATION
The Side Spray (
12A
) can be pulled forward to spray water in any direction. To activate
the Side Spray, press the Toggle Button (
12B
) located on the back of the Side Spray (
12A
).
13 FLUSHING & AERATOR CLEANING
After installation is complete, remove Aerator Housing (
13A
). Turn Valves (
13B
) on
and allow both hot and cold water to run for at least one minute each. While water is
running, check for leaks. To clean the aerator, disassemble Aerator Housing (
13A
) by
separating the Aerator Head (
13C
), Basket (
13D
) and Washer (
13E
). Once parts have
been cleaned, reassemble by reversing steps.
4
8A
9A
11A
8B
8C
8C
9B
9A
9B
HOT
COLD
ON
HOT
COLD
ON
12A
13B
12B
13A
13E
13D
13C
