Contador 2
Operating Instructions
© 2019 – Pfeuffer GmbH
Revision 7
Page 19 of 46
5.4
Additions and accessories
5.4.1
CONTAFILL 2
The CONTAFILL 2 semi-automatic filling station
is used to quickly fill small batches of seed,
grains and similar products (refer to
chapter
) in any quantity (from 1 to 99.999) in bags
(paper) or bottles (plastic).
The CONTAFILL 2 consists of a stainless steel
housing with interchangeable carousels for 10
bags or bottles of between 80 and 200 mm in
length, and installed electronic sensor for
detecting the bags.
Refer to
chapter 6.4
assembling and operating the CONTAFILL 2.
Figure 11: CONTADOR 2 with connected filling station CONTAFILL 2
Figure 12: Stand with carousel
When
operating mode P
is selected (refer to
chapter 7.5.1
), a carousel with full bags can be removed
from the CONTAFILL 2 and a second carousel with empty bags inserted.
The filling process can be continued while the full bags from the first carousel are being removed and it
is then provided with empty ones for the next pass. The stand, which is available as an accessory, makes
this process a lot easier.
