Contador 2
Operating Instructions
Page 36 of 46
Revision 7
© 2019 – Pfeuffer GmbH
7.5.1
»Bag« counting mode - CONTAFILL 2
First of all, establish the count value (refer to
chapter 7.4
Then select menu item
Contafill
and confirm with
Set
.
preset counter
→
Contafill
container
↑
Set
↓
bags
and
turn
can be selected as menu sub-items.
→
bags
turn
↑
Set
↓
Go to the respective submenu with
Set
.
In the
bags
submenu you can choose between two different operating modes:
1.
Operating mode B
If, as in the example below, you have set 10, the CONTAFILL 2 will work until 10 bags/bottles have been
filled.
Filling positions which do not have containers will be skipped.
In doing so, empty bags are positioned on the left and filled ones taken on the right until the chosen
number of bags has been reached.
bag position
B 0010
↑
++ Next --
2.
Operating mode P
If, as in the example below, you have set 10, the CONTAFILL 2 will work until all 10 positions have been
processed. Available bags/bottles will be filled.
If a container is available at just one filling position, then only this container will be filled.
bag position
P 0010
↑
++ Next --
Operating mode P
is intended for counting large batches without the need for constant operator -
intervention.
Once all parameters have been set,
Yes
at the end takes you back to the counting menu.
By contrast with the counting menu without CONTAFILL 2, the counting menu with CONTAFILL 2
contains additional information in the third row about the chosen operating mode and the associated
set value.
container 01
01000
P0010
Start Set Stop
Start the count with
Start
.
