Pfeiffer MVP 015-4 DC, Operating Instructions Manual

Page: 4 / 54

6.4.5 Data types 28
7 Parameter set 29
7.1 General 29
7.2 Control commands 29
7.3 Status requests 30
7.4 Reference value inputs 31
7.5 Additional parameter for the DCU 31
8 Operation 32
8.1 Putting the vacuum pump into operation 32
8.2 Switching on the vacuum pump 32
8.3 Configuring the connections with the Pfeiffer Vacuum parameter set 33
8.3.1 Configuring the digital outputs 33
8.3.2 Selecting the interfaces 33
8.4 Operating modes 33
8.4.1 Normal operation 34
8.4.2 Stand-by operation 34
8.4.3 Speed actuator operation 34
8.5 Operation monitoring 35
8.5.1 Operating mode display via LED 35
8.5.2 Temperature monitoring 35
8.6 Switching off the vacuum pump 36
9 Maintenance 37
9.1 Maintenance instructions 37
9.2 Checklist for inspection and maintenance 38
9.3 Change the diaphragms and valves 39
9.3.1 Dismantle the diaphragm head and valves 39
9.3.2 Cleaning and replacing the diaphragms and valves 40
9.3.3 Mount the diaphragm head and valves 40
10 Decommissioning 41
11 Recycling and disposal 42
11.1 General disposal information 42
11.2 Dispose of diaphragm pumps 42
12 Malfunctions 43
12.1 General 43
12.2 Error codes 44
12.3 Warning and error messages when operating with DCU 44
13 Service solutions by Pfeiffer Vacuum 46
14 Spare parts packs 48
15 Accessories 49
15.1 Accessory information 49
15.2 Ordering accessories 49
16 Technical data and dimensions 50
16.1 General 50
16.2 Technical data 50
16.3 Substances in contact with the media 51
16.4 Dimensions 51
Declaration of conformity 53
Table of contents
4/54