background image

Dear Customer,

Thank you for choosing a Pfeiffer Vacuum product. Your new roots pump should support you 
in your individual application with full performance and without malfunctions. The name 
Pfeiffer Vacuum stands for high-quality vacuum technology, a comprehensive and complete 
range of top-quality products and first-class service. From this extensive, practical experience 
we have gained a large volume of information that can contribute to efficient deployment and 
to your personal safety.
In the knowledge that our product must avoid consuming work output, we trust that our 
product can offer you a solution that supports you in the effective and trouble-free 
implementation of your individual application.
Please read these operating instructions before putting your product into operation for the 
first time. If you have any questions or suggestions, please feel free to contact 

info@pfeiffer-

vacuum.de

.

Further operating instructions from Pfeiffer Vacuum can be found in the 

Download Center

 on 

our website.

Disclaimer of liability

These operating instructions describe all models and variants of your product. Note that your 
product may not be equipped with all features described in this document. Pfeiffer Vacuum 
constantly adapts its products to the latest state of the art without prior notice. Please take 
into account that online operating instructions can deviate from the printed operating 
instructions supplied with your product.
Furthermore, Pfeiffer Vacuum assumes no responsibility or liability for damage resulting from 
the use of the product that contradicts its proper use or is explicitly defined as foreseeable 
misuse.

Copyright

This document is the intellectual property of Pfeiffer Vacuum and all contents of this 
document are protected by copyright. They may not be copied, altered, reproduced or 
published without the prior written permission of Pfeiffer Vacuum.
We reserve the right to make changes to the technical data and information in this document.

2/66

Summary of Contents for HILOBE 2704





































































Reviews: