Pfeiffer Vacuum HEPTA 630 P, Operating Instructions Manual

Page: 4 / 62

5.12.1Connect three phase motor with 6-pin terminal board 31
5.12.2Connect three phase motor with 12-pin terminal board 32
5.13 Checking the direction of rotation 33
5.14 Connecting the PTC thermistor tripping unit 33
6 Operation 35
6.1 Commissioning the vacuum pump 35
6.2 Switching on the vacuum pump 35
6.3 Conveying condensable vapors 36
6.4 Flushing the screw pump with fluid 37
6.5 Flushing the screw pump with gas 37
6.6 Switching off the vacuum pump 37
7 Maintenance 39
7.1 Maintenance information 39
7.2 Checklist for inspection and maintenance 40
7.3 Checking the lubricant level 40
7.4 Checking the cooling liquid level 41
7.5 Changing lubricant 41
7.5.1 Draining lubricant on the motor side 43
7.5.2 Draining lubricant on the vacuum side 43
7.5.3 Filling lubricant on the motor side 44
7.5.4 Filling lubricant on the vacuum side 45
7.6 Changing the cooling liquid 45
7.6.1 Draining cooling liquid 45
7.6.2 Filling cooling liquid 46
7.7 Changing the gas ballast filter 47
7.8 Drain condensate in the silencer 48
8 Decommissioning 49
8.1 Decommissioning the vacuum pump 49
8.2 Recommissioning 49
9 Recycling and disposal 51
9.1 General disposal information 51
9.2 Disposing of the screw pump 51
10 Malfunctions 52
11 Service solutions by Pfeiffer Vacuum 54
12 Accessories 56
12.1 Accessory information 56
12.2 Order accessories 56
12.3 Consumables 56
13 Technical data and dimensions 57
13.1 General 57
13.2 Substances in contact with the media 57
13.3 Technical data 57
13.4 Dimensions 60
Declaration of conformity 61
Table of contents
4/62